Category Archives: South Dakota

Fine English Scroll – an exercise in patience

I thought before jumping ahead into more complex styles, I should really give English scroll a try. It really appealed to me and seemed relatively simple, or so I thought. After studying numerous images on line, I drew a simple design and quickly cut it without knowing the proper way to go about it. But if you’re not making mistakes you’re not learning!

I was a little proud of this “work of art,” but then asked Ken Hunt on Instagram what he thought of it and I was so happy he replied, but my glory quickly faded when he kindly explained it to me it was not proper English scroll.

He sent me a drawing of my design pointing out my mistakes and giving me some good advice. It took me several hours to get it redesigned to where it looked correct (but without a master looking over your shoulder you’re always wondering if you’re on the right track.) I was determined to figure it out and cut until I got it right!

Ken continued helping me and I wouldn’t have figured it out without him! Unfortunately, (or maybe fortunately) I kept making mistakes, but I learn better by making them, that way I know what I shouldn’t do next time.
In my second attempt (image above), I had several scroll heads growing toward the origin, which may be okay in other styles, but not in English. There should be flow that radiates out which gives English Fine Scroll it’s simplicity and elegance. Get it wrong and it just looks like something is amiss, but you’re not quite sure what it is. The above image is a good example of that.

I redesigned again, correcting my mistakes, and it finally started to look like something!

Shading was also somewhat puzzling to me, I was afraid to cut it too heavy but you need to cut it heavy enough to make it pop. You can see the difference the proper flow and shading makes in the top scroll in the image above.
I was getting pretty happy with the results and cut a slightly smaller design in mild steel.

Ken pointed out that my outside leaves needed to be more random, closer together, and should have a flow to them. They also needed to be roughly the same size as the inside leaves.
I was feeling good about the progress I was making, but there seemed to be no end to my errors! I kept correcting them one at a time and moving forward.

I made the leaves closer together (but they probably could be more random). At this point I felt I was getting the gist of it, and with a little more practice I can be satisfied with it. I engraved a few more designs to make sure though.

Ken says, “Every engraver puts a different touch to their flowers and scroll , like identifying handwriting . With viewing some old guns people show on line you may spot some values to help.”
I wanted to get the basics of Fine English Scroll before adding my personal touch to it. I certainly don’t want obvious mistakes to be my signature. : )
More practice…

There are more elements in Fine English Scroll besides the scroll itself. There are flower bouquets and rondels that could be incorporated into the design. I wanted to give those a try as well. They proved to be just as challenging as the scroll.
My first attempt at the bouquet was not very good. The flowers and shading were okay, but the ferns are too long and needs to be more random and organic.

I tried cutting both. The bouquet turned out better but needed more shading around the flowers. I made the ferns shorter and that did help in the overall look of the bouquet.

The Rondel, or rosette as I thought it was called, was another fail indeed. In my mind it was just a round rosette that was supposed to look cool, but time and time again I was proven how little I knew about English scroll.
Ken is honest but very direct with his suggestions, “Your one looks like golf clubs and not like elongated scroll.”

I went back to work on the new rondel design after studying Ken’s sketches and several images I could find of shotguns engraved by Ken and other English masters. I would have never gotten this far without his help!

I engraved another bouquet before addressing the rondel and was finally able to get everything right, even though the scroll could use some mini scroll feelers in between the outside leaves.

After more scroll practice and another shot at the rondel, everything started coming together and looking more and more like the English scroll. I also noticed I was getting a little faster at it, even though it was not my goal. I purposely made bigger designs to get as much practice as I could and make as many mistakes as I could. (not on purpose)

At this point I was very happy with the scroll, but the rondel still looked like it could be better.
A friend was able to find a book called “English Fine Scroll construction and application” by Marcus Hunt (Ken’s son) , and after reading it I realized my cuts were totally wrong. It’s supposed to be a teardrop plunge cut, and I was cutting it as though it was a Western bright cut scroll.
I did a full day of practicing making that cut, but it proved to be harder than it looked. Previously, I used cold blue to darken the cuts but if done properly it will not be needed. Below is another attempt at fine English scroll, this time making proper cuts and no cold blue.

It’s going to take time to really master this style. I have learned a lot from this exercise and will continue to keep working at it. I hope this post has been informative to the beginner engravers out there, and would like to encourage you to not give up but keep pressing forward!

Open country

South Dakota landscape captured in the early morning. I have to admit, I struggle getting up real early but it’s sooooo worth it every time! And by early, I mean you have to be up before the sun actually rises…  😉

Open Country

Old red barn

I was wondering if I could find me some old barns to photograph using google maps and save time randomly driving around. I picked an area where I suspected I could find some and close to where I live, sure enough, after maybe 10 minutes I was able to locate a couple on the same road! They are very easy to spot from the air with what I call “the beak roof”.

Checked it out the next day and it sure is a beauty! Don’t you agree?

red barn
It sits next to a smaller shed where they used to store grain I presume and could be photographed from any direction. Often you find a cool looking barn and its so overgrown with trees and brush that its hard to get a good shot, but not this one, it sits right in the middle of a corn field! I must revisit this one again after we get some snow.

 

Warm winter day

I think it hit 60 degrees today and that is rare for South Dakota winters! According to weather forecast the cold is coming back so we took a ride this evening. Luckily we have several barns right around the corner so we stopped at two. This particular barn we visited a couple of years ago during the summer and early in the morning, I remember the grass was really tall and hard to walk in.

old barn

After exploring about I came up with several compositions that I found interesting. Maybe if we get some snow on the ground again I will give it another go.

Old American barnI purposely scour the area and look for something interesting to include in the foreground, it could be things like old wagon wheels, farming equipment, interesting trees, rocks, etc.  Such objects add interest and depth to your images, so keep that in mind if you are new to photography and try to use this technique on your next outing.

Happy shooting!

Frosty barn

I knew we might have some good opportunity when the forecast last night was calling for rain, snow and strong wind. So this morning it looked promising and we headed to take some pictures of our local barn. I wish there were a few clouds but I still like how it turned out. It was actually very warm, I really am tired of wearing gloves all the time.
They are calling for upper 40’s all next week woohoo!

old barn

Vintage Pepsi Spirit

We decided to revisit this cool old silo that we have driven by a thousand times but never had time to stop to take a picture, yet always admired how cool this piece of old Americana looked at sunset. So tonight, we grab the cameras and jumped in the jeep  just to take a picture around sunset, and it was so cold my fingers almost froze to my camera!

All in all I think it was worth the trip, the sunset was not as widespread as we hoped, but the light was still very pleasing. I took several dozen shots, but this is one of the better ones. I will try again in the future, perhaps it will look even better with dramatic rain clouds or an early sunrise. Oh, if you are wondering the sign says, “Catch That Pepsi Spirit.”

Taken with the Lumix GX7 and kit 14-42mm lens, which is surprisingly sharp and very light lens.

Enjoy!

Old American silo with pepsi sign

Sunset at the lake

We had a surprisingly warm day yesterday for January and we took full advantage of it. Visited our local lake and snapped a few shots of a gorgeous sunset using the new Lumix GX7. The ice have melted a little and there were pools of water reflecting the warm colors of the setting sun. Of course today we have a blizzard conditions with strong wind and drifting snow. Welcome to South Dakota…

Melting ice sunset

Early morning in Badlands

One thing I learned about photography is to get up early to catch that beautiful low angle light, also known as the golden hour. If you’re new to photography or looking to improve your photos, resist the temptation to sleep in and get out there bright and early. I guarantee that you will find something interesting to shoot, and your shots will look much better than if you were shooting during the day. Just make sure the sky is not completely cloudy before you leave, or you will not get the same effect.

OK, on to the picture at hand. While my wife and I were staying near the Badlands National Park in SD, we woke up early to beat the crowds and capture some images for the time lapse video we were working on. I couldn’t resist taking a moment to capture this shot while my wife was soaking up the warm morning sun along with a grand view of the surreal landscape. There wasn’t much color in the original photograph since I was shooting in to the sun, so I opted for the black and white and I think it works very well.

IMG_2352